Recalls: 1998 - DODGE - DAKOTA

---

Recalls

• NHTSA Campaign ID Number: 00V193000 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
  Recall Date: 07/20/2000

  Summary:
  VEHICLE DESCRIPTION: PICKUP TRUCKS BUILT WITH 2.5L ENGINES. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE LEFT FRONT BRAKE TUBE AND THE POWER STEERING HOSE.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  A PUNCTURE OF THE LEFT FRONT BRAKE TUBE CAN RESULT IN A LOSS OF BRAKING FORCE AT THE FRONT WHEELS, INCREASING THE RISK OF A CRASH.
  
  Remedy:
  DEALERS WILL INSPECT THE BRAKE TUBE AND POWER STEERING HOSE FOR WEAR. IF WEAR IS EVIDENT, THE BRAKE TUBE AND/OR POWER STEERING HOSE WILL BE REPLACED. A POWER STEERING STANDOFF BRACKET WILL BE INSTALLED ON ALL VEHICLES TO ENSURE THAT ADEQUATE CLEARANCE BETWEEN THE BRAKE TUBE AND POWER STEERING HOSE IS MAINTAINED.

• NHTSA Campaign ID Number: 00V198000 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
  Recall Date: 07/20/2000

  Summary:
  VEHICLE DESCRIPTION: PICKUP TRUCKS. SOME VEHICLES MAY HAVE BEEN BUILT WITH INADEQUATE CLEARANCE BETWEEN THE REAR AXLE VENT HOSE AND THE BRAKE HOSE.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  A PUNCTURE IN THE REAR BRAKE HOSE WILL RESULT IN A LOSS OF BRAKING FORCE AT THE REAR WHEELS.
  
  Remedy:
  DEALERS WILL INSPECT THE REAR BRAKE HOSE FOR EVIDENCE OF WEAR. WORN BRAKE HOSES WILL BE REPLACED. THE REAR VENT HOSE WILL BE SHORTENED BY 3 INCHES AND A CLIP WILL BE INSTALLED TO ASSURE CLEARANCE BETWEEN THE AXLE VENT LINE AND BRAKE HOSE IS MAINTAINED.

• NHTSA Campaign ID Number: 01V153000 - AIR BAGS
  Recall Date: 05/18/2001

  Summary:
  VEHICLE DESCRIPTION: PICKUP TRUCKS. SOUND DEADENER MATERIAL INSIDE THE STEERING WHEEL COULD BECOME DETACHED FROM THE COVER AND HOUSING. NOTE: THE RAM PICKUP TRUCKS WERE BUILT AT THE WARREN ASSEMBLY PLANT ("S" IN THE 11TH VIN POSITION) FROM MAY 16, 2000 THROUGH OCTOBER 23, 2000; ST. LOUIS NORTH ASSEMBLY PLANT ("J" IN THE 11TH VIN POSITION) FROM MAY 19, 2000 THROUGH OCTOBER 23, 2000; LAGO ALBERTO ASSEMBLY PLANT ("M" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000; AND SALTILLO ASSEMBLY PLANT ("G" IN THE 11TH VIN POSITION) FROM MAY 23, 2000 THROUGH OCTOBER 23, 2000. IMPORTANT: VEHICLES THAT HAVE ALREADY HAD THE PROPER CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN EXCLUDED FROM THIS RECALL. IN ADDITION, 1997-2000 MODEL YEAR VEHICLES THAT HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, ACCORDING TO WARRANTY RECORDS, HAVE BEEN ADDED TO THIS RECALL.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  WHEN THIS OCCURS, THE MATERIAL COULD INTERFERE WITH THE CLOCKSPRING RIBBON AND CAUSE AN OPEN CIRCUIT. THE DRIVER AIR BAG SYSTEM WILL BECOME DISABLED, AND THE AIR BAG WARNING LAMP WILL ILLUMINATE ON THE INSTRUMENT PANEL.
  
  Remedy:
  DEALERS WILL REPLACE THE CLOCKSPRING ASSEMBLY. OWNER NOTIFICATION BEGAN JUNE 18, 2001. ALSO SOME 1997-200 MODEL YEAR VEHICLES THAT, ACCORDING TO WARRANTY RECORDS, HAVE HAD A SUSPECT REPLACEMENT CLOCKSPRING INSTALLED, WILL ALSO BE INCLUDED IN THIS CAMPAIGN. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT DAIMLERCHRYSLER AT 1-800-853-1403.

• NHTSA Campaign ID Number: 06E022000 - SERVICE BRAKES, HYDRAULIC
  Recall Date: 03/13/2006

  Summary:
  CERTAIN AFTERMARKET BRAKE HYDRAULIC MASTER CYLINDERS SOLD AS REPLACEMENT BRAKE CYLINDERS FOR CERTAIN FORD, DAIMLERCHRYSLER, AND JEEP PASSENGER VEHICLES. THESE BRAKE CYLINDERS WERE SOLD UNDER THE BRAND NAMES OF NAPA, RAYBESTOS, AIMCO, AC DELCO, CARQUEST, BENDIX, AND WAGNER. ONLY PRODUCTS THAT WERE MANUFACTURED FROM JULY 27, 2005 THROUGH JANUARY 17, 2006 (DATE CODES 0529 THROUGH 0602) ARE SUBJECT TO THIS RECALL. WHEN SUBJECT TO VERY COLD TEMPERATURES, AN INTERNAL SEAL IN THE MASTER CYLINDER COULD LOSE FLEXIBILITY AND MAY CAUSE BRAKE FLUID TO LEAK.
  
  Manufacturer that filed the Recall:
  FORD MOTOR COMPANY
  
  Consequence:
  LOSS OF BRAKE FLUID CAN LEAD TO A DECREASE IN BRAKE LINE PRESSURE AND AN INCREASE IN STOPPING DISTANCE, WHICH CAN RESULT IN A VEHICLE CRASH.
  
  Remedy:
  AFFINIA (BRAKE PARTS, INC.) WILL REPLACE THE SUBJECT BRAKE HYDRAULIC MASTER CYLINDERS FREE OF CHARGE. THE RECALL BEGAN ON MARCH 20, 2006. OWNERS CAN CONTACT AFFINA GROUP CUSTOMER SERVICE AT 1-800-323-0354.

• NHTSA Campaign ID Number: 06E024000 - ENGINE AND ENGINE COOLING
  Recall Date: 03/17/2006

  Summary:
  CERTAIN REPLACEMENT K&N FUEL PERFORMANCE KITS, P/NOS. 57-1509, 57-1511, 57-1511-1, 57-1517, 57-1517-1, 57-1527, AND 57-1530. ALSO, A SMALL PERCENTAGE OF THESE KITS WERE SOLD UNDER THE MOPAR PERFORMANCE PARTS BRAND NAME (P/NOS. P5007069 AND P5007070). ALL KITS WERE MANUFACTURED FROM APRIL 20, 1999, THROUGH SEPTEMBER 23, 2004. THESE ASSEMBLIES WERE MANUFACTURED AS REPLACEMENT EQUIPMENT FOR CERTAIN DODGE PICKUP TRUCKS AND SUVS. A SMALL PIECE OF MATERIAL FROM THE TUBE WALL COULD BE SUCKED INTO THE ENGINE THROTTLE BODY, WHICH COULD CAUSE THE THROTTLE TO BECOME JAMMED IN THE OPEN POSITION.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  A JAMMED OPEN THROTTLE COULD CAUSE UNINTENDED ACCELERATION OF THE VEHICLE, POSSIBLY RESULTING IN A CRASH OR INCREASED STOPING DISTANCES WHEN BRAKING.
  
  Remedy:
  K&N WILL PROVIDE OWNERS WITH A FREE REPAIR KIT ALONG WITH REPAIR INSTRUCTIONS. THE RECALL BEGAN ON APRIL 20, 2006.

• NHTSA Campaign ID Number: 06E026000 - EXTERIOR LIGHTING
  Recall Date: 03/23/2006

  Summary:
  CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
  
  Manufacturer that filed the Recall:
  MAZDA NORTH AMERICAN OPERATIONS
  
  Consequence:
  WITHOUT THE AMBER REFLECTORS, THE VEHICLE WILL BE POORLY ILLUMINATED, POSSIBLY RESULTING IN A VEHICLE CRASH WITHOUT WARNING.
  
  Remedy:
  PRO-A MOTORS WILL NOTIFY OWNERS AND OFFER TO REPURCHASE THE LAMPS. THE RECALL BEGAN ON APRIL 3, 2006. OWNERS MAY CONTACT PRO-A MOTORS AT 323-838-2988.

• NHTSA Campaign ID Number: 06E065000 - EXTERIOR LIGHTING
  Recall Date: 07/17/2006

  Summary:
  CERTAIN AJ MOTORSPORT COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.
  
  Manufacturer that filed the Recall:
  TOYOTA MOTOR NORTH AMERICA, INC.
  
  Consequence:
  LACK OF AMBER SIDE REFLECTORS IN THE LAMPS WILL DECREASE LIGHTING VISIBILITY TO OTHER DRIVERS AND MAY POSSIBLY RESULT IN A VEHICLE CRASH.
  
  Remedy:
  AJ MOTORSPORT WILL NOTIFY OWNERS AND OFFER REIMBURSEMENT FOR THE LAMPS. THE RECALL BEGAN ON JULY 31, 2006. OWNERS MAY CONTACT AJ MOTORSPORT AT 626-618-2026.

• NHTSA Campaign ID Number: 97V170000 - SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:HOSES, LINES/PIPING, AND FITTINGS
  Recall Date: 10/10/1997

  Summary:
  VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS (2 WHEEL DRIVE ONLY). THE FRONT BRAKE HOSES OR ANTI-LOCK BRAKE SYSTEM (ABS) SENSOR WIRE MAY BE ABRADED AT THE FRONT WHEELS BY CONTACT WITH A FRONT WHEELHOUSE SPLASH SHIELD.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  PROLONGED BRAKE HOSE CONTACT CAN CAUSE A PARTIAL LOSS OF THE BRAKING SYSTEM. PROLONGED ABS SENSOR WIRE CONTACT CAN CAUSE A LOSS OF ABS FUNCTION.
  
  Remedy:
  DEALERS WILL TRIM THE FRONT WHEELHOUSE SPLASH SHIELDS AND THE BRAKE HOSES AND ABS SENSOR WIRES WILL BE INSPECTED. IF EVIDENCE OF ABRASION IS FOUND ON ANY HOSE OR ABS WIRE, THEY WILL BE REPLACED.

• NHTSA Campaign ID Number: 98V208000 - STRUCTURE
  Recall Date: 09/09/1998

  Summary:
  VEHICLE DESCRIPTION: LIGHT DUTY PICKUP TRUCKS. THESE VEHICLES MAY HAVE BEEN BUILT WITH BOLTS THAT WERE NOT PROPERLY HARDENED. THE BOLTS WERE USED TO ATTACH THE CAB AND THE CORE SUPPORT TO THE FRAME.
  
  Manufacturer that filed the Recall:
  CHRYSLER LLC
  
  Consequence:
  THIS CONDITION CAN ALLOW THE CAB TO SEPARATE FROM THE FRAME INCREASING THE RISK OF A CRASH.
  
  Remedy:
  DEALERS WILL REPLACE THESE BOLTS WITH PROPERLY HARDENED BOLTS.